Changing The "Channel Setup" Setting - Sony WEGA KV-SW21 Operating Instructions Manual

O
Changing the "Channel Setup"
setting
The "Channel Setup" menu allows you to receive cable TV programs, preset
channels automatically, edit the channels, set the signal booster and preset FM
radio stations.
1
Press WEGA GATE and select "Settings".
2
Press V or v to select the "Channel Setup" icon (
3
Press V or v to select the desired item (e.g., "Cable"), then press
Select
"Cable"
"Auto Program"
"Program Edit"
"Signal Booster"
To
receive cable TV programs.
Press V or v to select "On", then press
If you select "Cable: On", you will be able to receive 125
cable TV channels.
If there are no cable TV channels, you will receive VHF
broadcast channels only.
To receive only VHF and UHF broadcast channels, select
"Off", then press
preset channels automatically.
label the program number, skip the program number and
block unwanted programs.
(see step 3 of the section "Initial Setup" in E).
improve the picture quality if the TV signal is too strong or
weak.
Press V or v to select either "Off" if the signal is too strong
(picture distorted; picture with lines; signal interference) or
"Auto" if the signal is weak (snowy picture), then press
), then press
.
.
.
.
.