Samsung ME32C User Manual page 128

Manual Network Settings
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
1
Network Settings screen. Select Start, press E, and then press E again.
Go to the
2
The network test screen appears and the verification process starts. Press Stop. The verification process stops.
3
Select IP Settings on network connection screen. The
4
Select the field at the top, press E, and then set
― Setting
IP Settings Enter manually
to
5
When done, select OK at the bottom of the page, and then press E. The network test screen appears and the verification process starts.
6
When the connection has been verified, the
IP Settings screen appears.
IP Settings to Enter manually. Repeat the entry process for each field in the
DNS Setting Enter
automatically changes to
"Wired network and Internet connection
IP
manually.
completed." message appears.
Address.
128