Samsung 450 Series Installation Manual page 31

Menu Item
DRM Mode
DRM
PI AES Data
PI AES Log
View PI AES Log
Self Diagnosis
for TV
Self Diagnosis
for HTV
SW Upgrade
System
Service Pattern
ATV Cable AGC Gain
DTV OpenCable
AGC Gain
Sound Bar Out
Contact Samsung
Standby LED
TV reset
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only
in stand-alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
initial Value
Configures CAS support.
OFF : Turns off CAS support.
OFF
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
477 / 478
Pro:idiom : Select to turn on Pro:Idim CAS support only. (only for 477/677 and above
/ 677 / 678
models)
:pro:idiom
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom
CAS. (only for 477/677 and above models)
0x0000 Displays the current state of Pro:idiom AES. (only for 477/677 and above models)
PI AES Log consists of Pro:idiom AES diagnostic register, here after referred as
OFF AESD, values. These register log will help us diagnose PI key loss issue in the field
and provide solution for it. (only for 477/677 and above models)
... Displays Pro:idiom AES Log OSD (only for 477/677 and above models)
Lets you check the state of the TV picture and sound.
• Picture Test : Use to check for picture problems. If the problem appears in the
test picture, select YES, and then follow the directions on the screen.
• Sound Test : Use to check for sound problems. If the problem occurs during the
test, select YES, and then follow the directions on the screen.
Lets you check the state of Pro:Idiom and its communication with the SI STB
or SBB. If you have any problems with the Pro:idiom encryption channel or the
communications with the SI STB or SBB, use this diagnosis function. If Pro:Idiom
DTV Channel Key Loss appears to have failed and the Pro:Idim encryption channel
has failed to play content, first check the broadcasting systems related to Pro:Idiom
encryption. If your broadcasting system does not have a problem, contact Samsung
Service. If STB SI Vendor Setting appears to have failed and communication with the
SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does
not have a problem, contact to Samsung Service.
Lets you upgrade the TV SW with a USB memory stick. See Page 45.
Lets you check the state of the TV picture by displaying picture test patterns. Press
OFF
the Menu button to turn off the test patterns and exit.
Lets you control the AGC gain of the analog cable channels. Don't change the default
Default
value unless problems occur.
Lets you control the AGC gain of the digital cable channels. Don't change the default
Default
value unless problems occur.
ON : TV speaker sound will be mute. Sound will come out through HDMI. You must
connect the Sound Bar to hear the sound.
OFF
OFF : Sound will come out through TV speakers normally. (460 none)
Samsung Contact information
ON : The LED light in fuction will be in red light.
ON
OFF : The LED light in fuction will be light off.
Returns all settings on the TV to their factory defaults.
Description
31
English