Sony WEGA KV-BZ212 Operating Instructions Manual
Trinitron
Hide thumbs
Also See for WEGA KV-BZ212:
- Operating instructions manual (82 pages) ,
- Operating instructions manual (40 pages) ,
- Operating instructions manual (20 pages)
Related Manuals for Sony WEGA KV-BZ212
Summary of Contents for Sony WEGA KV-BZ212
- Page 1 2-688-569-13 (1) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-BZ212 © 2006 Sony Corporation...
-
Page 2: Specifications
Specifications KV-BZ212M10 Note Power requirements 220-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K Color system PAL, PAL 60, SECAM, NTSC3.58 (AV IN), NTSC4.43 Channel coverage VHF : E2 to E12 /UHF : E21 to E69 / CATV : S01 to S03, S1 to S41 VHF : 1 to 11 /UHF : 21 to 69 / New Zealand only... - Page 3 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
-
Page 4: Getting Started
Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •... - Page 5 Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV top control panel.
- Page 6 Setting up your TV (“Initial Setup”) (continued) d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). Then press 1) To label, press V or v to select the alphanumeric characters for the label.
-
Page 7: Tv Top Control, Front And Rear Panels
TV top control, front and rear panels TV top control panel WEGA GATE PROG TV rear panel (MONO) (MONO) TV front panel (MONO) (MONO) (MONO) Button/Terminal Function Turn off or turn on the TV. Remote control sensor. Wake Up indicator. Standby indicator. -
Page 8: Connecting Optional Components
Connecting optional components Connecting to the video input terminal ( t ) TV front panel Audio/Video cable (not supplied) (MONO)— —(MONO) Camcorder TV rear panel Antenna cable (not supplied) (MONO) Audio/Video cable (not supplied) (MONO) DVD Player Sound Mix Terminal You can connect the audio L and R jacks from your AV equipment to both (MONO) jacks on the TV to enjoy mixed left and right sound. -
Page 9: G Troubleshooting
• Check the antenna cable and connection on the TV, VCR and at the wall (see F). noisy sound • Check the antenna setup. Contact a Sony dealer for advice. • Display the “Channel Setup” menu and select “Manual Program” to preset the channel again (see M). - Page 10 TV. • Count the number of times the 1 (standby) indicator flashes. The 1 (standby) indicator on your Press ! (main power) to turn off your TV. Contact your nearest Sony TV flashes red service center. several times after every three seconds.
-
Page 11: Using The Remote Control And Basic Functions
Using the remote control and basic functions Button Description 1 ?/1 Turn off temporarily or turn on – the TV. Display the TV program. – Jump to last program number – that has been watched for at least five seconds. PROG +/–... - Page 12 Using the remote control and basic functions (continued) Button Description Timer operations Set TV to turn on automatically according to the – (Wake Up Timer) desired period of time (max. of 12 hours). indicator on TV lights up amber once you set the wake up timer.
-
Page 13: Introducing The Wega Gate Navigator
Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and “Settings” menu. WEGA GATE External Inputs “TV” watch the preset TV Settings channels (see D) Select Confirm Select Confirm External Inputs Video 1... -
Page 14: "Settings" Adjustment
“Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press The following is an overview of the items that can be adjusted. “Picture”... -
Page 15: Changing The "Picture" Setting
Changing the “Picture” setting The “Picture” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. Make sure the “Picture” icon ( ) is selected, then press Press V or v to select the desired item (e.g., “Picture Mode”), then press Select “Picture Mode”... -
Page 16: Changing The "Sound" Setting
Changing the “Sound” setting The “Sound” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. Press V or v to select the “Sound” icon ( ), then press Select “Intelligent Volume” adjust the volume of all program numbers and video inputs automatically. -
Page 17: Changing The "Channel Setup" Setting
Changing the “Channel Setup” setting The “Channel Setup” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” icon ( ), then press Press V or v to select the desired item (e.g., “Auto Program”), then press Select “Auto Program”... -
Page 18: Presetting Channels Manually
Changing the “Channel Setup” setting (continued) Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. (1) Make sure “Program” is selected, then press (2) Press V or v until the program number you want to preset appears on the menu, then press Select the desired channel. -
Page 19: Changing The "Setup" Setting
Changing the “Setup” setting The “Setup” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. Press V or v to select the “Setup” icon ( ), then press Press V or v to select the desired item (e.g., “Language”), then press Select “Language”...