GE 23 Owner's Manual And Installation page 17

Precise Fill
(on some models)
This water dispenser is equipped with a feature
called "precise fill." This feature allows you to choose
a precise amount of water (cups or ounces) that
you would like dispensed. Pints and Liters are also
available for LCD models.
Touch LED Dispenser Control
Press the PRECISE FILL CUPS/OZ pad. The
WATER pad will light and the CRUSHED and
CUBED ice pads will turn off. The last unit used
will be displayed.
Press the PRECISE FILL pad again to toggle
between cups and ounces.
If you selected OUNCES, press the
select the number of ounces you would like to have
dispensed between 2–99 ounces. The default is 8
ounces.
Important Facts About Your Dispenser
Do not add ice from trays or bags to
the storage drawer. It may not crush or
dispense well.
Avoid overfilling glass with ice and use of
narrow glasses. Backed-up ice can jam
the chute or cause the door in the chute
to freeze shut. If ice is blocking the chute,
poke it through with a wooden spoon.
Beverages and foods should not be
quick-chilled in the ice storage drawer.
Cans, bottles or food packages in the
storage drawer may cause the ice maker
or auger to jam.
To keep dispensed ice from missing the
glass, put the glass close to, but not
touching, the dispenser opening.
If you selected CUPS, press the
select the amount you would like to have dispensed.
They are displayed as 1/4, 1/3, 1/2, 2/3 and 3/4, with
the highest amount being 16 3/4 cups. The default
is 1 cup.
Press the cup against the cradle and water will
begin dispensing. It will automatically stop when
the amount set has been dispensed. The display
will show the amount of water dispensed, beep,
then reset after 5 seconds.
NOTE: Do not leave the dispenser unattended when
water is being dispensed.
If you would like to stop dispensing water
before the specified amount has been
or pad to
dispensed, just remove the cup from the cradle.
The display will show the amount that has been
dispensed for 5 seconds. If the cup switch is
pressed again within that time, the dispenser
will continue up to the set amount. If not, the
display will return to the set amount.
Some crushed ice may be dispensed
even though you selected CUBED. This
happens occasionally when a few cubes
accidentally get directed to the crusher.
After crushed ice is dispensed, some
water may drip from the chute.
Sometimes a small mound of snow will
form on the door in the ice chute. This
condition is normal and usually occurs
when you have dispensed crushed ice
repeatedly. The snow will eventually
evaporate.
GEAppliances.com
or pad to
17