Related Manuals for Contec DS-080D Series
Summary of Contents for Contec DS-080D Series
- Page 1 Digital Signage Player AMD T56N 1.65GHz, SSD, POSReady7, DVI-I DS-080D Series User’s Manual CONTEC CO.,LTD.
- Page 2 Check Your Package Thank you for purchasing the CONTEC product. The product consists of the items listed below. Check, with the following list, that your package is complete. If you discover damaged or missing items, contact your retailer. Product Configuration List...
-
Page 3: Copyright
No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this document. -
Page 4: Table Of Contents
Limited One-Year Warranty ........................2 How to Obtain Service..........................2 Liability ..............................2 Safety Precautions ........................... 3 Safety Information ........................... 3 Caution on the DS-080D Series ...................... 3 SYSTEM REFERENCE Specification ............................5 Physical Dimensions ..........................6 HARDWARE SETUP Before Using the Product for the First Time..................7 Hardware Setup ............................ - Page 5 GFX Configuration..........................26 Memory Configuration ..........................27 South Bridge ............................28 SB SATA Configuration ........................29 SB USB Configuration ..........................30 SB GPP Port Configuration........................31 SB HD Azalia Configuration ........................32 Boot ................................33 Security ..............................34 Save & Exit Settings..........................35 APPENDIX Battery ..............................37 DS-080D Series User’s Manual...
-
Page 6: Introduction
The installed OS is already equipped with a Runtime module which is required on OS side to trip Kinect for Windows sensor.You can use this product as an application controller which is equipped with NUI (Natural User Interface ) that features a control with voice or gestures. Supported OS Windows Embedded POSReady7 DS-080D Series User’s Manual... -
Page 7: Customer Support
You can download updated driver software and differential files as well as sample programs available in several languages. Note! For product information Contact your retailer if you have any technical question about a CONTEC product or need its price, delivery time, or estimate information. Limited One-Year Warranty CONTEC products are warranted by CONTEC CO., LTD. -
Page 8: Safety Precautions
CAUTION indicates a potentially hazardous situation which, if not avoided, may CAUTION result in minor or moderate injury or in property damage. Caution on the DS-080D Series Handling Precautions DANGER This product supports an attached AC adapter and AC cable only. - Page 9 Avoid installation in a location where people may come into contact with the case. CONTEC does not provide any guarantee for the integrity of data on any recording media such as SSD.
-
Page 10: System Reference
Operating temperature 0 - 40°C Storage temperature -10 - 60°C Humidity 10 - 90%RH (No condensation) Floating dust particles Not to be excessive Corrosive gases None *1 This product are designed to use under the good condition. DS-080D Series User’s Manual... -
Page 11: Physical Dimensions
2. System Reference Physical Dimensions Figure 2.1. Physical Dimensions DS-080D Series User’s Manual... -
Page 12: Hardware Setup
* Before using this product, be sure to execute " Restore Defauls " to initialize the BIOS settings to their default values. (See Chapter 5, "Save & Exit") CAUTION Be sure to connect the keyboard and mouse to it before turning the power on for the first time. DS-080D Series User’s Manual... -
Page 13: Hardware Setup
Six M3 length 6mm screws are recommended to secure the system on wall.Fasteners are not included with the unit, and must be supplied by the installer. The types of fasteners required are dependent on the type of wall construction. DS-080D Series User’s Manual... -
Page 14: Each Component Function
Insert AC plug into AC inlet. The product will wake up.(Not PowerSW) Display(29pin DVI-I x1) Ethernet 1000BASE-T/100BASE-TX/10BASE-T RJ-45 connector Serial port RJ-50 connector USB port connector x2 AUDIO Line out (3.5 phone jack) DS-080D Series User’s Manual... -
Page 15: Component Function
Pin No. Pin No. name name name DATA2- N.C. DATA2+ GREEN DATA2 BLUE SHIELD N.C. HSYNC N.C. DATA0- DDC CLK DATA0+ DATA0 DDC DATA SHIELD VSYNC N.C. DATA1- N.C. DATA0 DATA1+ SHIELD DATA1 CLK+ SHIELD N.C. CLK- DS-080D Series User’s Manual... -
Page 16: Giga Bit-Ethernet: Lan A - B
Connector for Serial Port Interface is provided. Table 4.4. Serial Port Interface RJ-50 Connector type Pin No. Signal name Data set ready Ground Ground Transmit data Receive data Data carrier detect Data terminal ready Clear to send Request to send Ring indicator DS-080D Series User’s Manual... -
Page 17: Usb Ports
This product is equipped USB 2.0 interface. Table 4.5. USB Connector Pin No. Signal name USB_VCC USB- USB+ USB_GND Line out Interface: AUDIO A line output connector is provided. You can plug a headphone or amplifier-integrated speakers into this connector. DS-080D Series User’s Manual... -
Page 18: Bios Setup
: Exit Current page to the next higher level menu Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Enter> key. DS-080D Series User’s Manual... -
Page 19: In Case Of Problems
Even a seemingly small change to them has the potential for causing you to be repaired. A Final Note About Setup The information in this chapter is subject to change without notice. DS-080D Series User’s Manual... -
Page 20: Main
F4:Save & Exit ESC:Exit Item Explanation System Language Choose the system defaults language.(English ONLY) System Date Set the Date. Use Tab to switch between Data elements. System Time Set the Time. Use Tab to switch between Time elements. DS-080D Series User’s Manual... -
Page 21: Advanced
F3:Optimized Defaults F4:Save & Exit ESC:Exit Item Explanation Launch PXE OpROM Enable or Disable Boot Option for Legacy Netwotk Devices. Launch Storage OpROM Enable or Disable Boot Option for Legacy Mass Storage Devices with Option ROM. DS-080D Series User’s Manual... -
Page 22: Acpi Settings
Selected the highest ACPI sleep state the system will enter, ACPI Sleep State when the SUSPEND button is pressed. Lock legacy Resources Enabled or Disabled Lock of Legacy Resources. S3 Video Repost Enabled or Disabled S3 Video Report. DS-080D Series User’s Manual... -
Page 23: Cpu Configuration
Provide to adjust_PPC object. NX Mode Enabled / Disabled NO-execute page protection Function. SVM Mode Enabled / Disabled CPU Virtualization. C6 Mode Enabled / Disabled C6. Node 0 Information View Memory Information related to Node 0. DS-080D Series User’s Manual... -
Page 24: Ide Configuration
Not Present SATA Port4 Not Present SATA Port5 Not Present →←:Select Screen ↑↓:Select Item Enter:Select +/-:Change Opt. F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit Item Explanation Serial-ATA Controller Enabled / Disabled Serial ATA Controller. DS-080D Series User’s Manual... -
Page 25: Usb Configuration
The EHCI ownership change should be Claimed by EHCI driver. USB transfer time-out The time-out value for Control, Bulk, and Interrupt transfers. Device reset time-out USB mass storage device Start Unit command time-out. Device power-up delay Maximum time the device Start Unit command time-out. DS-080D Series User’s Manual... -
Page 26: Super Io Configuration
▶Serial Port 0 Configuration ▶Serial Port 1 Configuration →←:Select Screen ↑↓:Select Item Enter:Select +/-:Change Opt. F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit Item Explanation Serial Port 0/1 Configuration Set Parameters of Serial Port0/1 (COMA/COMB) DS-080D Series User’s Manual... -
Page 27: H/W Monitor
Temperatures/Voltages The values read-only values as monitored by the system and show the PC health status. CPU Shutdown Aside from the Disabled options, Temperature this field allows the setting of shutdown temperature from 70C to 95C. DS-080D Series User’s Manual... -
Page 28: Chipset
→←:Select Screen ↑↓:Select Item Enter:Select +/-:Change Opt. F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit Item Explanation North Bridge This item shows the North Bridge Parameters. South Bridge This item shows the South Bridge Parameters. DS-080D Series User’s Manual... -
Page 29: North Bridge
[Disabled] F3:Optimized Hotplug Mode Control [Disabled] Defaults Link Speed [Max Speed] F4:Save & Exit ESC:Exit IOMMU Mode [Disabled] Item Explanation IOMMU Mode IOMMU is supported on LINUX based systems to convert 32bit I/O to 64bit MMIO. DS-080D Series User’s Manual... - Page 30 ▶GFX Configuration ▶Memory Configuration ▶Node 0 Information →←:Select Screen ↑↓:Select Item Enter:Select +/-:Change Opt. F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit Item Explanation Memory Clock This option allows user to select different memory clock. DS-080D Series User’s Manual...
-
Page 31: Gfx Configuration
Aptio Setup Utility - Copyright © 2011 American Megatrends, Inc. Chipset GFX Configuration PSPP Policy [Balanced-Low] →←:Select Screen ↑↓:Select Item Enter:Select +/-:Change Opt. F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit Item Explanation PSPP Policy PCIe Speed power policy. DS-080D Series User’s Manual... -
Page 32: Memory Configuration
Aptio Setup Utility - Copyright © 2011 American Megatrends, Inc. Chipset Memory Configuration Integrated Graphics [Auto] Bank Interleaving [Enabled] →←:Select Screen ↑↓:Select Item Enter:Select +/-:Change Opt. F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit Item Explanation Integrated Graphics Enable Integrate Graphics controller. DS-080D Series User’s Manual... -
Page 33: South Bridge
Chipset SB CIM Version: 1.1.1.0 ▶SB SATA Configuration ▶SB USB Configuration ▶SB GPP Port Configuration ▶SB HD Azalia Configuration →←:Select Screen ↑↓:Select Item Enter:Select +/-:Change Opt. F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit DS-080D Series User’s Manual... -
Page 34: Sb Sata Configuration
[Enabled] F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit Item Explanation OnChip SATA Type Native IDE / n RAID / n AHCI / n Legacy IDE / n IDE -> AHCI / n HyperFlash DS-080D Series User’s Manual... -
Page 35: Sb Usb Configuration
USB PORT 11 [Enabled] F2:Previous Values USB PORT 12 [Enabled] F3:Optimized USB PORT 13 [Enabled] Defaults USB PORT FL0 [Enabled] F4:Save & Exit USB PORT FL1 [Enabled] ESC:Exit USB Device Wakeup From S3 or S4 [Enabled] DS-080D Series User’s Manual... -
Page 36: Sb Gpp Port Configuration
[Enabled] NB-SB PHY PLL Power Down [Enabled] SB GPP PHY PLL Power Down [Enabled] SB GPP LANE REVERSAL [Disabled] →←:Select Screen ↑↓:Select Item Enter:Select +/-:Change Opt. F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit DS-080D Series User’s Manual... -
Page 37: Sb Hd Azalia Configuration
SDIN0 Pin Config [Azalia] SDIN1 Pin Config [Azalia] SDIN2 Pin Config [Azalia] SDIN3 Pin Config [Azalia] Azalia Snoop [Disabled] →←:Select Screen ↑↓:Select Item Enter:Select +/-:Change Opt. F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit DS-080D Series User’s Manual... -
Page 38: Boot
UPON REQUEST – GA20 can be disabled using BIOS serivices. Option ROM Messages Set display mode for Option ROM. Options are Force BIOS and Keep Current. Interrupt 19 Canture Enable:Allows Option ROMs to trap Int 19. DS-080D Series User’s Manual... -
Page 39: Security
The password must be 3 to 20 Characters long. Adiministrator Password User Password →←:Select Screen ↑↓:Select Item Enter:Select +/-:Change Opt. F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save & Exit ESC:Exit Item Explanation Administrator Password Set Setup Administrator Password. User Password Set User Password. DS-080D Series User’s Manual... -
Page 40: Save & Exit Settings
Restore the User Defaults to all the setup options. Boot Override Pressing ENTER causes the system to enter the OS. Launch EFI Shell from h Attempts to launch EFI Shell application (Shellx64.efi)from device one of the available filesystem devices. DS-080D Series User’s Manual... - Page 41 5. BIOS Setup DS-080D Series User’s Manual...
-
Page 42: Appendix
- Nominal voltage - Nominal capacity :220mAh - Lithium content :1g or less Removing the battery Remove the battery according to the following figure. Disposing the battery Dispose the removed battery properly in accordance with local requirements. DS-080D Series User’s Manual... - Page 43 3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan Japanese http://www.contec.co.jp/ English http://www.contec.com/ Chinese http://www.contec.com.cn/ No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. [12212012] [12212012] Management No. NA02206 Parts No. LYPQ351...