Additional Safety Rules; Functional Description - Makita UB1100 Instruction Manual

21. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
22. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
23. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
24. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
Service
25. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
26. Follow instruction
changing accessories.
27. Keep handles dry, clean and free from oil and
grease.

ADDITIONAL SAFETY RULES

1. Always use protective goggles, a cap and
mask when using the blower.
2. Never point the nozzle at anyone in the vicinity
when using the blower.
3. Always use the dust bag when collecting dust,
chips and the like.
4. Do not collect still smoldering cigarette ashes,
freshly cut metals shavings, screws, nails and
the like. Warning - Electric shock could occur
if used on wet surfaces. Do not expose to rain.
Store indoors.
5. Never block suction inlet and/or blower outlet.
Increased motor
dangerous fan breakage.
6. The blower is not intended for use by young
children or
supervision.
7. Young children should be supervised to
ensure that they do not play with the blower.
SAVE THESE INSTRUCTIONS.
for lubricating
revolution may
infirm persons

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function on
the tool.
Switch action
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and
returns to the "OFF" position when released.
For UB1100
1
004753
To start the tool, simply pull the switch trigger. Release
and
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
ENB017-1
trigger fully, then release it.
For UB1101
1
2
004754
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
cause
trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
without
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
A speed control screw is provided so that maximum tool
speed can be limited (variable). Turn the speed control
screw clockwise for higher speed, and counterclockwise
for lower speed.
4
2
5
3
4
1. Switch trigger
2. Lock button
1. Switch trigger
2. Speed control
screw
3. Higher
4. Lower
5. Lock button