Table of Contents
Advertisement
U
G
SER
UIDE
Backlight
1) Start > Settings > Control Panel > Backlight.
2) In the first tab (Level), you can adjust backlight setting for when device is using
battery power, or for when device is using AC adaptor power.
3) In the second tab (Backlight), you can enable/disable if you wish backlight to turn off
automatically after a certain period of time. You can configure settings for when
device is using battery power, or for when device is using AC adaptor power.
Keypad lighting
1) Start > Settings > Control Panel > KeyPadLed.
2) Two choices are available:
o Turn on keypad lighting when user presses any key, and lighting stays on.
o Turn on keypad lighting when user presses any key, but lighting stays on only for
a defined period of time.
3) Default setting is to turn on keypad lighting for 60 seconds when user presses button.
Button configuration
1) Start > Settings > Control Panel > Button_Configuration.
2) Click on a key in the list to select it.
3) Click on the Find button to select application you wish to associate to the key.
4) Click on the OK button on the top right side of the window to save setting.
5) To remove setting from a key, select the key in the list, then click on the Empty
button.
6) To remove settings from all keys, enable checkbox All Empty, then click on the Empty
button.
10 / 75
Advertisement
Table of Contents
