Schematic Diagram - Main Section (1/3) - Sony CFD-S39 Service Manual

6-11. SCHEMATIC DIAGRAM — MAIN SECTION (3/3) —
(Page 29)
(Page 32)
– 33 –
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
(Page 24)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and
specified.
• C : panel designation.
• U : B+ Line.
• Power voltage is dc 9 V and fed with regulated dc power
supply from battery terminal.
• Waveforms
6
4.19MHz
IC501
7
32.768kHz
IC501
• Voltage and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
no mark : FM
1 / W or less unless otherwise ( ) : TAPE PLAY
4
< > : CD STOP
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal produc-
tion tolerances.
– 34 –
CFD-S39
5.2Vp-p
#™
5.4Vp-p
&£