Charging Batteries; Status Led - Honeywell QuadCharger Quick Start Manual

Charging Batteries

Ensure all components are dry prior to mating batteries with peripheral
devices. Mating wet components may cause damage not covered by
the warranty.
Assurez-vous que tous les composants sont secs avant de connecter les
terminaux/batteries à des périphériques. L'insertion de composants
humides risque de provoquer des dommages non couverts par la garan-
tie.
2
Battery
(Standard Shown)

Status LED

Each charging slot has a dedicated status LED located above the
slot.
LED Status
Orange (Solid)
Green (Solid)
Off
1
Indicates
The battery is properly seated in the slot and is
charging.
The battery is fully charged.
No battery is installed, the battery is improperly
installed, or a battery error has occurred.
Status LED