Ethernet Setting - Intex I-Buddy 3 Owner's Manual

First, connect USB 3G card to the product through
OTG-USB cable. One moment later, the system will detect this
device and automatically switch the mode. After successful
switch, enter "Setting / Wi-Fi and Network", select "Mobile
Network" and the system will connect to the network
automatically. Connection completed, you can use 3G.
Before connecting 3G, please close Wi-Fi.
Before connecting 3G, please make sure the product is with
enough power or connected to DC charger charging. Since 3G
will consume more power (add about 1/3 more), If you don't
use 3G, unplug the dongle to save power to extend battery life.
4-3． ． ． ．

Ethernet Setting:

Use cable Ethernet card (USB-RJ45) connecting to Internet
instruction
There are two requirements as below to use USB-RJ45
connecting to Internet:
1. ADSL account and password are set up correctly on
34