Montigo H42DF Installation, Operation & Maintenance Manual page 18

H42DF Series Indoor Gas Fireplace
HR42DF
Installing the HR42DF
Artificial Rocks
Installing the Artificial Rocks:
The HR42DF is supplied with (37) thirty-seven faux ceramic fibre river
rock. Unpack the rocks and handle them very carefully. Shown Below:
1. Remove the glass door as described on Pages 15-16.
2. Install Rear faux "A" ceramic 3 in1 Rock as shown in Figure 31.
Back of Fireplace
Pilot and cover
Rock riser
Burner holes
Figure 31. Placement 3 in 1 rear faux ceramic rock "A".
3. Place the (4) four center faux rocks "B" on the riser spikes.
Figure 31a. Inset
 
Figure 31b. Placement 4-center faux ceramic rock "B".
4. Place (1) one center faux rocks "C" on Pilot cover.

Figure 31c. Placement 1-faux ceramic rock "C", (on Pilot cover).
Page 18
Installation
3 in 1 faux
Rock "A"
Air Inlets
Spikes, 2-per rock
 
4-Center faux Rock "B"
(flat side down)
5. Place (18) eighteen faux rocks "D" as shown below.




   
Figure 31c. Placement 18-faux ceramic rock "D", (as shown).
6. Place (3) three faux rocks "E" as shown below.

Figure 31D. Placement 3-faux ceramic rock "E", (as shown).
6. Place 11) eleven faux rocks "F" as shown below.




 
Figure 31E. Placement 11-faux ceramic rock "F", (as shown).
Figure 31F. Completed Placement. Note: You may have to adjust the
Faux rocks to produce a pleasing flame pattern and reduce
sooting. (as shown)





   
 
 



Part No. XG0148 - 012810
