Setting The Display - Fujitsu LPF-4800 User Manual

Setting the DISPLAY

You can select and set up the following items from the DISPLAY menu.
DISPLAY
Resizing On
INPUT1 Mode Analog
Language English
Source Status On
Blank Screen Blue
: Select ENTER : Next
(RGB DISPLAY Menu)
Resizing
You can select whether to display the picture in real mode (with the
same resolution as the input signal) or in resizing mode (converting it
to the same XGA size as the LCD panel).
Select by pressing the and
The factory default setting is [On].
Language
You can select the language of the menu display.
Select by pressing the and
Video Standard (VIDEO only)
You can select the video broadcasting format. For normal use, set on
[AUTO]. Select by pressing the
The factory default setting is [AUTO].
Source Status
You can select the method of displaying the status of the input source
as follows.
1) On
The source and mode status are displayed. The display disap
pears after a few seconds. When there is no signal, the [NO
SIGNAL] message is constantly displayed.
2) Off
The input source status is not displayed.
Select by pressing the and
The factory default setting is [On].
Overscan (VIDEO only)
When there is interference at the top of the video screen, etc., you can
adjust the picture so that that part is not visible.
Select by pressing the and
The factory default setting is [Standard].
Component Selection
When you connect the component to the RGB/COMPONENT
terminal, select [On] by pressing the
the [Component Display] menu will appear. Select the component
input signal.
Component Display (COMPONENT only)
You can select Normal (480P, 480I) or Wide (720P, 1080I) for the
COMPONENT input signal.
Select by pressing the and
DISPLAY
Off Resizing
Digital Language
Video Standard
Off Component Input
Black Source Status
Blank Screen
Overscan Standard
3D Y/C
: Select ENTER : Next
(VIDEO DISPLAY Menu)
adjustment buttons.
adjustment buttons.
and adjustment buttons.
adjustment buttons.
adjustment buttons.
and adjustment buttons and
adjustment buttons.
On Off
English
AUTO
SD HD
On Off
Blue Black
Medium Maximum
On Off
(COMPONENT DISPLAY Menu)
Language
En g lish
Fran ç ais
Deutsch
Es p añol
Italiano
: Select MENU : Return
(Language)
Video Standard
AUTO
WIDE
NTSC
PAL
SECAM
PAL–M
PAL–N
NTSC4.43
: Select MENU : Return
(Video Standard)
En-27