Auto Sync; Fine Sync - Sharp LC-46D43U Aquos Operation Manual

Useful adjustment settings
Press
~/~
to select "Auto Sync.", and then
press ENTER.
Centers the image by moving it up or
down.
Centers the image by moving it to the left
or right.
Press
~/~
to select the specific adjustment
item.
Press MENU to display the MENU screen, and
then press
~/~
to select "Setup".
Press
~/~
to select "Fine Sync.", and then
press ENTER.
H-Pos.
V-Pas.
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
Press ~/~ to select "Yes", and then press
ENTER.
• Auto Sync. starts and "Now adjusting the image."
displays.
For automatically adjusting the PC image.
Press MENU to display the MENU screen, and
then press
~/~
to select "Setup".
Press MENU to exit.
Clock
Adjust when the image flickers with vertical
stripes.
Phase
Adjust when characters have low contrast
or when the image flickers.
• When Auto Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.
• Auto Sync. may fail even if "Completed" displays.
• Auto Sync. may fail if the cornputer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
Press
~/~
to adjust the item to your desired
position.
Press MENU to exit.
• For resetting all Fine Sync. adjustment items to the factory
preset values, press ..
./T
to select "Reset", and then
press ENTER.
• It is not necessary to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
@-
31