Maintenance And Lubrication - Yamaha 40XMH Assembly Instruction Manual

SETTING MOTOR HEIGHT
STRAIGHT
EDGE
CAUTION
When starting the engine for the first time, watch to see that the cooling water comes out of the small hole
at the rear side of the engine just below the power head. This is to check your assembly of the cooling
water pump and its connections.

MAINTENANCE AND LUBRICATION

See last page
MODEL BC FOR 40 HP YAMAHA SERIES
ASSEMBLY INSTRUCTIONS
YAMAHA MODEL 40XMH, 2 CYLINDER, 2 STROKE, 42.9 CU. IN.
3