Introduction; Product Identification; Product Names; Product Changes - Motorola W160 Service Manual

Level 1-2 Service Manual

Introduction

Product Identification

Product Names

Product Changes

Regulatory Agency Compliance

Motorola® Inc. maintains a worldwide organization that is dedicated to provide responsive,
full-service customer support. Motorola products are serviced by an international network of
company-operated product care centers as well as authorized independent service firms.
Available on a contract basis, Motorola Inc. offers comprehensive maintenance and installation
programs that enable customers to meet requirements for reliable, continuous communications.
To learn more about the wide range of Motorola service programs, contact your local Motorola
products representative or the nearest Customer Service Manager.
The model number on a label (usually on the housing) identifies Motorola products. Use the
entire model number when inquiring about the product. Numbers are also assigned to chassis
and kits.
Use these numbers when requesting information or ordering replacement parts.
Product names are listed on the front cover. Product names are subject to change without
notice. Some product names, as well as some frequency bands, are available only in certain
markets.
When electrical, mechanical or production changes are incorporated into Motorola products, a
revision letter is assigned to the chassis or kit affected, for example: -A, -B, or -C, and so on.
The chassis or kit number, complete with revision number is imprinted during production. The
revision letter is an integral part of the chassis or kit number and is also listed on schematic
diagrams, and printed circuit board layouts.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions:
• This device may not cause any harmful interference, and
• this device must accept interference received, including interference that may cause
undesired operation
This class B device also complies with all requirements of the Canadian Interference-Causing
Equipment Regulations (ICES-003).
Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le
materiel brouilleur du Canada.
12-December-2007 4