Suzuki GSX1300BKA Supplementary Service Manual page 78

4E-43 ABS:
Step
3 1) Disconnect the front wheel speed sensor coupler.
2) Measure the resistance between "A" (W) and ground at
the front wheel speed sensor coupler.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Resistance (Ω)
Normal value ("A" – Ground)
∞ Ω (Infinity)
(A)
Is the resistance between "A" and ground OK?
4 1) Measure the resistance between "5" (B/R) and ground at
the ABS control unit coupler.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
(B): 09900–25009 (Needle pointed probe set)
Tester knob indication
Resistance (Ω)
Normal value ("5" – Ground)
∞ Ω (Infinity)
ABS control unit coupler (Harness end)
Is the resistance between "5" and ground OK?
Action
Sensor side
"A"
I823H3450040-03
(A)
(B)
I823H3450041-03
Yes
Inspect the wire
harness. (Faulty W/R
wire)
Go to Step 6.
No
Faulty front wheel
speed sensor. Refer to
"Front Wheel Speed
Sensor Removal and
Installation
(GSX1300BKAK8)
(Page 4E-9)".
Go to Step 5.