Playing Cds Without Interruption - Sony MHC-VX90AV Operating Instructions Manual

Programming the CD tracks
(continued)
To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
To
Check the
program
Clear a track from
the end
Clear a specific
track
Add a track to the
program
Clear the entire
program
Tips
• The program you made remains in the CD player
even after it has been played back. Press CD (P
to play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
38 GB
Press
CHECK on the remote
repeatedly. After the last
track, "CHECK END"
appears.
CLEAR on the remote in
stop mode.
CHECK on the remote
repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
1 Select the disc tray with a
DISC 1~3 button.
2 Select the track by
turning the jog dial.
3 Press ENTER/NEXT.
p once in stop mode or
twice while playing.
Playing CDs without
interruption
–– CD Non-Stop Play
You can play CDs without pausing between
tracks.
You cannot use this function with VIDEO
CDs.
(Power)
1
1
Press FUNCTION repeatedly until
"CD" appears in the display, then
place a CD.
2
Press CD NON-STOP to light the
indicator.
"NON-STOP PLAY" appears in the
display.
3
Press CD (P.
To cancel Non-Stop Play
Press CD NON-STOP so that the indicator
goes out and "NON-STOP OFF" appears in
the display.
3
2