AEG LAVATHERM 57760 electronic Operating Instructions Manual page 29

Symptom
The drying process takes
unusually long
The door cannot be closed
The door cannot be opened
with the DOOR button
The drum illumination does
not work
Display EMPTY WATER is lit
EMPTY WATER indicator illu-
minated, even though the
container has already been
emptied
The remaining running time
display changes rapidly.
The dryer terminates the
drying process automatically:
END is displayed shortly after
program start; no display of
the extent of drying
Possible cause
The heat exchanger unit
is covered with fluff
Fluff filter is clogged
Fluff filter has not been
inserted correctly and/or
the filter lid not closed
Electric mains plug not
connected
Program selector set to
OFF
The program selector is in
the OFF position
The bulb needs replacing
Condensate container full
Foreign bodies, e. g. ani-
mal hairs, can block the
inlet nozzle as well as the
valve on the end of the
container
The remaining running
time is adjusted
automatically depending
on the type of items
being washed, the
washing time and the
degree of dampness.
Too dry or too little
laundry filled-in for the
selected program
Something not working?
Solution
Clean the heat exchanger
unit
Clean the fluff filter
Replace the fluff filter
and ensure the filter lid is
closed
Connect the mains plug
Set a program. The fill-in
door can be opened at
any time by pressing
firmly against the door
(pressing location
Turn the program selector
dial to LIGHT
Replace bulb
Empty the condensate
container
With the container pulled
out, switch on the
appliance momentarily.
The blockage can be
removed from the contai-
ner shaft or the hair clea-
ned out of the valve
Automatic process. There
is no unit fault.
Select time program or
higher drying stage (e.g.
EXTRA DRY instead of
INTENSIVE DRY)
)
29