Using Yamaha Av Link Technology - Yamaha MusicCast MCX-CA15 Install Manual

Distributedaudio controller/ distributedaudio amplifier
Hide thumbs Also See for MusicCast MCX-CA15:
Table of Contents

Advertisement

Using YAMAHA AV link
technology
YAMAHA AV link technology enables you to
control YAMAHA AV receivers connected to the
MCX-CA15 or I/O box from your client.
AV link technology can be used to:
Adjust or mute the volume output level of the
connected YAMAHA AV receiver connected to
the client.
Switch preset groups and stations when the input
on the connected YAMAHA AV receiver is set
to TUNER.
Switch the input of the connected YAMAHA AV
receiver to play back songs selected from the
client.
YAMAHA AV link technology requires the use of
an IR flasher (or infrared emitter), which issues AV
link control commands to your YAMAHA AV
receiver connected to the MCX-CA15 or I/O box.
Notes
• Only YAMAHA AV receivers displayed in the
"Amplifier" menu currently support the AV link
function.
• If the AV receiver you are using does not appear in
the "Amplifier" menu, select "MCX-CA15" or
"MCX-IB15" in the "Amplifier" menu. However,
selecting "MCX-CA15" or "MCX-IB15" in this
case does not enable you to use YAMAHA AV
link technology.
• Zone selection is only available with some
YAMAHA AV receivers. For details, refer to the
owner's manual for the receiver you are using.
■ AV link connections
If you want to enjoy YAMAHA AV link technology,
a YAMAHA AV receiver that supports AV link must
be connected to the AUDIO OUT jacks on the
MCX-CA15 or I/O box. Further, an IR flasher must
be connected to the IR/CTRL jack on the
MCX-CA15 or the IR OUT jack on the I/O box.
LISTENING TO EXTERNAL COMPONENTS
AV OUT
CAT-5 cable
MCX-CA15
AV IN
or I/O box
MCX-CA15
VIDEO OUT
AUDIO OUT
SW OUT
AUDIO IN
IR/CTRL
VIDEO OUT
DC IN 12V
STATUS
AUDIO
IR/CTRL
OUT
or
IR OUT
AUDIO IN
IR flasher
IR flasher
receiver/amplifier
Note
The IR flasher must be positioned so that it is in
direct line with the IR receiver of the connected
YAMAHA AV receiver you are using.
■ To register YAMAHA AV receivers
To control a YAMAHA AV receiver using
YAMAHA AV link technology, register your
YAMAHA AV receiver using the following
procedure.
MCX-3 WD01440
LIBRARY
VOL
MUTE
FAVORITES
1
2
SELECT
1
PLAY
MENU
INFO.
PAUSE
1
2
STOP
4
5
GROUP
PLAY
7
7
OFF TIMER ON TIMER
1
Press and hold MENU until the Top
Menu screen is displayed.
MCX-C15
MCX-C15
MENU
VOL
1
2
3
4
FAVORITES
VOL
LIBRARY
VOL
MUTE
FAVORITES
1
2
3
4
SELECT
BOOKMARK
PLAY
MENU
INPUT
INFO.
PAUSE
RANDOM
1
2
3
STOP
REPEAT
4
5
6
GROUP
PLAY
GROUP
RECALL
7
S
OFF TIMER ON TIMER
VIDEO IN
YAMAHA AV
3
4
2-6
BOOKMARK
INPUT
RANDOM
3
REPEAT
6
GROUP
RECALL
S
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Musiccast mcx-c15

Table of Contents