Siemens 4075 Operating Instructions Manual page 86

Table of Contents

Advertisement

Outgoing MSN freely selectable
This is a feature which enables you to determine which MSN is to be used
for the subsequent call. This is important not only for call number display on
the called party's phone but also for calculating call charges. Call costs,
which can be coded by MSN free of charge on the provider's bill, are
assigned to the MSN that was used to make the appropriate call.
P
Parking calls
You park a call when you unplug the telephone during a call or replace the
handset so you can pick up the call on another handset connected to the
same line. The call remains connected during this time.
Phonebook
Enhanced feature of a telephone; stores the names and call numbers of
other subscribers. The numbers can be quickly found and dialled.
PIN
Abbreviation for Personal Identification Number. This is used to protect
against unauthorised use, examples include the system-PIN, answering
machine PIN and handset PIN.
R
Recording the calls
This is a feature of the answering machine; enables a call to be recorded.
Reject call waiting
Deactivates the call waiting signal.
Remote replay
Answering machine function. This involves dialling in to the answering
machine to listen to messages; in most cases you can also delete messages
and change announcements.
Remote power-on
This enables the answering machine to be switched on and off under PIN
control during a telephone call.
Repeater
With a repeater you can increase the range of the handsets linked to a base
station telephone. The unit receives the radio signal from the base station
telephone and transmits it on.
Repertory keys/function keys
Enhanced feature on a telephone; a limited set of call numbers can be
assigned to specific keys. These programmed numbers can then be dialled
at the push of a button.
Ring delay
For each internal user you can define how many ringing signals are received
before ringing is activated. This setting can be made for each MSN.
If you are operating your handset on the private call number, ringing should
start after, say, three ring tones in addition to the base station telephone (the
base station telephone will start ringing immediately), whereas your
handset should ring immediately if you receive a call on the business
number.
Room monitoring
A feature on the answering machine or telephone, for example. Enables you
to listen in on a room via the telephone network. PIN-protected.
86

Advertisement

Table of Contents
loading

Table of Contents