How To Terminate The Access Point Mode - Canon IB4000 series Online Manual

Note
• If you select SSID or Security protocol using the
can confirm the current access point name (SSID) and the current security setting.
Printing with the Access Point Mode
Print with the access point mode following the procedure below.
1. Connect an external device such as a computer or a smartphone to the printer via
wireless LAN.
Perform wireless LAN settings with your external device, then assign the access point name specified
for the printer as a destination.
Note
• For details on how to perform wireless LAN settings with an external device, refer to the
device's instruction manual.
• When a WPA2-PSK (AES) password is valid on the printer, entering the password is required to
connect an external device to the printer via wireless LAN. Enter the password specified for the
printer.
2. Start printing from an external device such as a computer or a smartphone.
Note
• For details on how to print from an external device such as a computer or a smartphone via
wireless LAN, refer to the device's or application's instruction manual.

How to terminate the Access Point Mode

In environments that the printer is connected with the computer over the wireless LAN usually, set the
printer to the wireless LAN connection following the procedure below when you finish using the printer
with the access point mode temporarily.
1. Press the Setup button.
The Setup menu screen is displayed.
2. Use the button to select Device settings, then press the OK button.
The Device settings screen is displayed.
3. Use the button to select LAN settings, then press the OK button.
4. Use the button to select Change LAN, then press the OK button.
5. Use the button to select Wireless LAN active, then press the OK button.
If you do not use the printer over wireless LAN, select Wired LAN active or LAN inactive.
button and press the OK button, you
208