Samsung 320TSn-2 Service Manual page 56

4. Troubleshooting
AutoColor Part

SERVICE MENU SERVICE MENU
AUTO COLOR AUTO COLOR
WHITE BALANCE WHITE BALANCE
MST9788CLD MST9788CLD
PDP LOGIC PDP LOGIC
AUDIO AUDIO
YC DELAY YC DELAY
OPTION OPTION
SPREAD SPECTRUM SPREAD SPECTRUM
RESET RESET
CHECKSUM CHECKSUM
M-MG32MWWAC-0904.0 M-MG32MWWAC-0904.0
White Balance Part

SERVICE MENU SERVICE MENU
AUTO COLOR AUTO COLOR
WHITE BALANCE WHITE BALANCE
MST9788CLD MST9788CLD
PDP LOGIC PDP LOGIC
AUDIO AUDIO
YC DELAY YC DELAY
OPTION OPTION
SPREAD SPECTRUM SPREAD SPECTRUM
RESET RESET
CHECKSUM CHECKSUM
M-MG32MWWAC-0904.0 M-MG32MWWAC-0904.0
4-16
PC analog Only (1024x768@60 16gray pattern)
Color control operates normally only in certain modes
of certain patterns, but in other cases, the operation
may distort color. Also, color control is not normal when
controlling color in a mode other than XGA 60Hz.
AV Only (Check board pattern)
Color control operates normally only in certain modes of
certain patterns, but in other cases, the operation may
Used for color control.
But excessive setting may saturate the color.
Extreme caution needed.!!
WHITE BALANCE
SUB BRIGHTNESS
SUB CONTRAST
RED OFFSET
GREEN OFFSET
BLUE OFFSET
RED GAIN
GREEN GAIN
BLUE GAIN
Register value in the Scaler
RED / BLUE / GREEN
Adjust the Gain and Offset
Extreme caution needed.!!
distort color.
Extreme caution needed.!!
ON
OFF
OFF
128
128
On: Display factory
128
adjusting value
128
Off: Display default
setting value
128
128
128
128