Advertisement
2.
Connect external cables to the cOnnectOrs(aLarM in, POwer, rs-485, aLarM
Out) and connect the cOnnectOr to the aDaPtOr.
Insert the cable into the FraMe set, and close the aDaPtOr.
M
ENG.indd 5
POWER INPUT
ALARM IN
HOUSING
EXTERNAL
CABLE
ADAPTOR
Then, wrap the Bnc JacK with the insuLatiOn tuBe, and use an insulation tape
to seal up the end of the insuLatiOn tuBe so that the Bnc JacK does not
protrude outside of the insuLatiOn tuBe coating.
For more information about cable connection, refer to Connecting the adaptor cable in the
CAMERA's Instruction book.
ALARM OUT
RS-485
BNC JACK
INSULATION
TUBE
SCX-DO300 _
2009-10-12 15:28:02
Advertisement
