Epson Stylus CX4900 Service Manual page 160

EPSON Stylus CX4900/CX4905/CX5000/DX5000/DX5050/CX5900/CX6000/DX6000/DX6050
External view (2)
Left Side
Guide Pin
Tab
EJ Frame
C.B.P. 3x6 F/Zn
Grounding Plate
(4±1kgfcm)
Figure 4-45. Removing EJ Roller Unit
DISASSEMBLY/ASSEMBLY
Guide Pin
EJ Frame
Front Paper Guide Support
EJ Roller Unit
6. Remove the right Bush 5 from the EJ Frame Unit.
7. Remove the screw (x1,
remove the EJ Frame Grounding Plate.
Right Side
8. Remove the screw (x1,
9. Remove the Front Paper Guide Support together with the EJ Roller Unit while
releasing the tabs (x2,
Tab
Match the guide pins (x2,
Bush 5
with the positioning holes (x2) of the EJ Frame.
Confirm that Bush 5s on both sides are securely inserted into the
notches of the Main Frame.
Make sure that there is no gap between the EJ Frame Unit and
the Main Frame.
Check if the EJ Roller Unit moves smoothly.
After replacing the Front Paper Guide Support with a new one,
A D J U S T M E N T
R E Q U I R E D
always apply grease G-46 to the specified parts.
After removing/replacing the EJ Frame Unit, perform the
adjustment referring to
(p172)
Printer Section
) that secures the EJ Frame Grounding Plate, and
) that secures the Front Paper Guide Support.
) that secure the Front Paper Guide Support.
) of the Front Paper Guide Support
Left Side
Figure 4-46. Installing Bush 5s
•
Refer to Figure 6-8 (p194) for details.
Table 5-1."Required Adjustments"
Revision A
Right Side§
160