Advertisement
Extend the Speaker
USB Connection
Charging the iM60
CHARGE BEFORE USE
Note: When not in use, turn speaker off to save battery power.
Computer USB port
LED
Power Switch
USB Connection
Line-out
Jack
mobile phone
PC
Connect To Audio Input Source
Using the iM60
To powered
To iM60
USB port
Press speaker down from the top and twist clockwise to lock in
place.
To unlock and expand the speaker, grip the top and bottom
and give a small twist counter-clockwise. DO NOT pull hard
To audio
once open, as the built in spring will automatically extend the
source
speaker to its proper position
Charging the iM60
The iM60 is powered by a rechargeable battery in the speak-
USB Charging and Audio
er. Make sure to charge the speaker before use.
Connection Cable Included
• Connect the mini-USB plug to the audio/charge input jack on
the speaker.
• Connect the larger USB plug to a powered USB port, such as
that on a computer. The light on the speaker will turn to red
while charging and turn blue when fully charged.
When the blue power light dims, or if you start to notice sound
distortion at higher volumes, it's time to recharge the battery.
Connecting the iM60
• Connect the mini-USB plug to the audio/charge input jack on
the speaker.
• Connect the stereo 3.5mm audio plug to the headphone jack
or line-out of any audio device.
• Slide the Power Switch of the speaker to the ON position (
The blue power light will come on.
• Press play on your audio device and adjust its volume to
listen to audio.
• If you wish to "daisychain" iM60 speakers, connect the
3.5mm audio plug to the Line Out Jack on an iM60 that is
PSP
iPod
MP3/MP4
already connected to an audio source (see above) and the
mini-USB plug to the audio input jack on another iM60.
Laptop
) .
Advertisement
