Simple Setup; Making The Connections - Panasonic SC-PT250 Operating Instructions Manual

Simple setup

Making the connections

Making the connections
Connect the AC mains lead only after all other connections have been made.
• Ensure that you have the complete accessories before making the connections.
Conserving power
The main unit consumes a small amount of power, even when it is in standby mode (approx. 0.8 W). To save power when
the unit is not to be used for a long time, unplug it from the household mains socket. You will need to reset some memory
items after plugging in the unit.
Before connecting the AC
mains lead, set the voltage.
For Southeast Asia, Thailand, the Middle East,
South Africa, Saudi Arabia and Kuwait
Change the voltage selector to the
appropriate position for the area in which
this system is used.
Connect to the speakers.
Attach the speaker-cable stickers to make connection
easier.
SUB
WOOFER
6
6 SUBWOOFER
10
RQT8043
Downloaded From TheatreSystem-Manual.com Manuals
RQTX0055-B_Out_new5.indd 10 RQTX0055-B_Out_new5.indd 10
To household mains socket
Do not insert the
wires beyond the
wire insulation.
+: White
−: Blue
Connect to the power
supply.
For Saudi Arabia and Kuwait
BE SURE TO READ THE NOTE
ON AC MAINS LEAD ON
PAGE 2 BEFORE CONNECTION.
Note
The included AC mains lead is for use
with this unit only. Do not use it with other
equipment.
Be careful not to cross
(short-circuit) or reverse the
polarity of the speaker wires
as doing so may damage the
speakers.
Speaker-cable sticker
2 FRONT (R)
1 FRONT (L)
4 SURROUND (R)
3 SURROUND (L)
SURROUND
SURROUND
Lch
Lch
3
3
Connect to the
antenna.
■ FM indoor antenna
Tape the antenna where
reception is the best.
Adhesive tape
Insert the wire fully.
Push!
5 CENTER
2/26/07 3:30:41 PM 2/26/07 3:30:41 PM