Alarm Sensor (White/Red); White/Red (Alarm Sensor) - Pioneer Premier DEH-P520 Installation Manual

DFS Alarm Installation

ALARM SENSOR (White/red)

The white/red lead is a negative triggered (Grounding) input that can be connected to vari-
ous separately sold shock or glass sensors. There is no limit as to how many sensors are
connected, so you can ensure total protection of your vehicle. Follow the makers instruc-
tions as to installation and wiring.
Note:
• If the shock sensor detects vehicle vibrations, use the negative (–) output type. If you use the positive
(+) output type, the alarm will sound continually, and the shock sensor will not operate correctly.
Glass Sensor
• To ensure full proper operation of DFS Alarm, Pioneer suggests using only white/red
wire, electronic sensors capable of providing a pulse width greater than 64 ms.
11
Blue/brown (refer to "STARTER CUT-OFF".)
White/orange (refer to "DOOR LOCK".)
White/red
Brown (refer to "ALARM OUTPUT".)
White/yellow (refer to "DOOR SWITCH".)
Shock Sensor
(Ensure proper sensitivity adjustment in
accordance with maker's instructions.)
This Product
Fig. 7