Advertisement
A CLOSER LOOK
Tandem MIG 800 Amp Welding Torch
Torch Specifications :
Duty Cycle: 800 amps 60% duty, mixed gas
700 amps 100% duty, mixed gas
Max. current per electrode: 450 amps
Cooling requirements: one water circulating source providing a min. of .45 gpm, at 40 psi
Weight: 7.5 lbs. (with cables elevated 1 ft., 4 ft. from torch mounting bracket)
Available Lengths: 4 ft., 6 ft., 8 ft., 10 ft., 12 ft.
Compatible Torch Reamer with external sprayer: M18426-1
Torch mounting to Power Feed 10 Robotic wire feeders K1780-1 and K1780-2
The 800 amp Tandem MIG torch is supplied with Power Feed 10 Robotic Wire Feeder
compatible cable ends. The cable assemblies plug directly into the feeder power block,
(with K1506-1 gun connector installed.) Gas is delivered to each side of the torch through a
short hose extending from associated wire feeder gas outlet fitting.
Torch alignment fixture L10430-1
Torch alignment should be performed after any severe torch collision or after any major
torch disassembly. The L10430-1 torch alignment fixture is configured to set the alignment
and spacing of the S22693-XXX torch contact tips. The bench fixture is engineered to
accept both standard and wide spaced torch configurations.
Torch alignment fixture L10430-1
EXPENDABLE REPLACEMENT PARTS
Water-Cooled Nozzle
Standard on all 800 amp torches.
The S22693-118 water-cooled nozzle
assembly is designed to provide maximum
gas coverage for both high speed and
high deposit applications. Nozzle features
brass construction for maximum rigidity
and cooling.
ORDERING INFORMATION:
Welding torch with torch mounting bracket and diffusers (less contact tips and liners)
Description
Torch with 4 ft. cables
Torch with 6 ft. cables
Torch with 8 ft. cables
Torch with 10 ft. cables
Torch with 12 ft. cables
Nozzle Retainers
Two different nozzle retainers are
available for different electrode spacing.
Nozzle retainers are
available with two
different contact tip
spacings — standard
and wide. Each
retainer provides the
mounting surface for
the gas nozzle and
establishes contact tip
spacing. An air blast
hose is part of each
S22693-152 (Std.)
S22693-135 (Wide)
[3]
Torch Dimensions
Torch mounting bracket is included as part of
the torch assembly (dimensions in inches
[millimeters])
Part number
Shipping weight
S22693-124
S22693-123
S22693-122
S22693-121
S22693-133
Nozzle Retainer Insulators
Two different Nozzle Retainer Insulators
are available to accommodate different
Torch Nozzle Retainer Insulator mounts
between the torch retainer and gas
diffusers, protecting the retainer and
providing orifices for air blast cleaning.
There are two different sized insulators to
assembly.
S22693-117 (Std.)
S22693-146 (Wide)
Tandem MIG 800 Amp Welding Torch
18.4 lbs.
21.8 lbs.
25.2 lbs.
28.6 lbs.
32.0 lbs.
electrode spacing.
fit the two retainer sizes.
www.lincolnelectric.com
Advertisement
