Adjusting The Airflow Direction And Rate - Daikin FTXS20K2V1B Operation Manual

Adjusting the Airflow Direction
and Rate
13
You can adjust the airflow direction to increase your comfort.
■
To start auto swing
Up and down airflow direction
Press
• " " is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
■
To set the flap at desired position
• This function is effective while flap is in auto swing mode.
Press
desired position.
• " " disappears from the LCD.
■
To adjust the louvers at desired position
Hold the knob and move the louvers.
• You will find a knob on the left-side and the right-side
blades.
• When the unit is installed in the corner of a room, the
direction of the louvers (vertical blades) should be facing
away from the wall.
If they face the wall, the wall will block off the wind,
causing the cooling (or heating) efficiency to drop.
• If the flap is in the way, press
the way and then adjust the louvers.
.
when the flap has reached the
on the remote controller to move the flap out of