Removing Of Major Parts - Sharp LC-32P50E Service Manual

REMOVING OF MAJOR PARTS (LC-26P50E)
1. Remove the Terminal Cover1.
2. Remove the 1 lock screw 2 and detach the ID Cover.
3. Remove the 2 lock screws 3 and detach the Hinge Cover.
4. Remove the 4 lock screws 4 and detach the stand.
5. Remove the 21 lock screws 5 and detach the Rear Cabinet.
6. Remove the 4 lock screws 6and detach the Center Angle.
7. Loosen the 2 top cover ass'y fixing screws, and unplug the connecting cable from the KM (P1200) connector of
the AV unit to remove the top cover ass'y.
8. Remove the 3 lock screws 8 from Top Cover, and detach the KEY Unit.
Terminal Cover
1
3
4
Hinge Cover
ID Cover
2
Rear Cabinet
Stand
KEY Unit
8
9
7
Top over Ass'y
P1200
LC-26P50E
LC-32P50E
LC-37P50E
6
enter Angle