Honda TRX420FPA Owner's Manual page 206

Installation
1. Position the wheel.
2. Position the wheel nuts so that the tapered sides face the wheel
rim ( ). 2
3. Hand-tighten the wheel nuts on the wheel, then lower the ATV to the
ground before tightening the nuts in a crisscross (rather than circular)
pattern to the specified torque:
47 lbf·ft (64 N·m , 6.5 kgf·m)
If a torque wrench was not used for installation, see your Honda dealer
as soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
If You Have a Flat Tire
Taking Care of the Unexpected 197