Adjusting The Picture - Dell E228WFP Service Manual

22"LCD Color Monitor
C
Brightness/Contrast Hot Key
C, D
Down (-) and Up (+)
Auto Adjust
D
E
Power Button and Indicator

3.3 Adjusting the Picture

Menu and
Icon
Submenus
Exit
Brightness/
Contrast
Use this button for direct access to the "Brightness" and "Contrast"
control menu.
Use these buttons to adjust (decrease/increase ranges) items in the
OSD menu.
NOTE: You can activate automatic scroll feature by pressing
and holding either + or - button.
Use this button to activate automatic setup and adjust menu. The
following dialog appears on a black screen as the monitor self-adjusts
to the current input:
Auto Adjustment allows the monitor to self-adjust to the incoming video
signal. After using Auto Adjustment, you can further tune your monitor
by using the Pixel Clock (Coarse) and Phase (Fine) controls under
Image Settings.
NOTE: Auto Adjust will not occur if you press the button
while there are no active video input signals, or attached cables.
Use the power button to turn the monitor on and off.
The green light indicates the monitor is on and fully functional. An
amber light indicates power save mode.
Description
Select to exit the Main menu.
Brightness adjusts the luminance of the backlight.
Adjust Brightness first, then adjust Contrast only if further adjustment is
necessary.
Push the + button to increase luminance and push the - button to decrease
luminance (min 0 ~ max 100).
Contrast adjusts the degree of difference between darkness and lightness on the
monitor screen.
8
Auto Adjust In Progress
Dell E228WFP