Perimeter Alarm System; Arming The System - Lincoln 2011 MKX Owner's Manual

Locks and Security
been programmed to your vehicle, you cannot program anymore and the
message MAX # OF KEYS LEARNED will be displayed on the message
center.
7. Remove intelligent access key from utility compartment pocket and
press the or
keys to exit programming mode.
8. Verify that the remote entry functions operate (lock, unlock) and that
the vehicle starts with new intelligent access key.
If the intelligent access key has been successfully programmed, it can be
used to activate the Intelligent Access with Push Button Start feature
and can be used to start your vehicle.
Note: To program MyKey™ features, refer to MyKey™ in this chapter.

PERIMETER ALARM SYSTEM

The perimeter alarm system will help protect your vehicle from
unauthorized entry.
When the following types of unauthorized entry occur:
• any door, the hood or the liftgate/trunk is opened without using the
keypad or the remote entry transmitter,
• or if the ignition is turned on when using an invalid key,
the perimeter alarm will flash the turn signal lamps and sound the horn.

ARMING THE SYSTEM

The system is ready to arm whenever the ignition is off. To arm the
system, do one of the following:
• Press the
control on the remote entry transmitter.
Note: If you press the
transmitter within three seconds, the horn will chirp once to let you
know that all doors, the hood and the liftgate/trunk are closed. If any
of these are not closed, the horn will chirp twice to warn you that
they are still open.
• Press the driver or passenger interior door lock control
door is open, then close the door.
• Lock the doors using the intelligent access method (press the lock
area in either front door handle).
• Press and hold the 7 • 8 and 9 • 0 controls together on the keyless
entry pad to lock the doors (driver's door must be closed).
114
2011 MKX (mkx)
Owners Guide, 1st Printing
USA (fus)
control on the newly programmed intelligent access
control twice on the remote entry
while the