Canon MX520 series Fax Manual page 85

6. Hang up the handset to finish using the service.
Using the Rotary Pulse Line
• Dialing by Using the Hook Button
Note
You can use the Hook button only when Hook key setting in Security control under FAX
settings is set to Enable.
Security control
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Press the FAX button.
The Fax standby screen is displayed.
3. Press the Hook button.
4. Use the Numeric buttons to dial the number of the information service.
5. When the recorded message for the information service answers, press the Tone button to switch
to tone dialing.
6. Use the Numeric buttons to press the numbers in accordance with the message.
7. Press the Hook button to finish using the service.
• Dialing by Using the Telephone Connected to the Machine
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Press the FAX button.
The Fax standby screen is displayed.
3. Lift the handset of the telephone.
4. Use the telephone to dial the number of the information service.
5. When the recorded message for the information service answers, use the telephone to switch to
tone dialing.
When you dial the number of the information service using the telephone connected to the
machine, you cannot use the machine to switch to tone dialing. For instructions on how to switch
to tone dialing, refer to your telephone's instruction manual.
6. Use the telephone to press the numbers in accordance with the message.
7. Hang up the handset to finish using the service.