Toshiba 50PH46P Service Manual page 8

LOCATION OF SCREEN AND FOCUS VR'S
To remove the Speaker grille and Front panel.
Speaker grille
REPLACEMENT OF HIGH VOLTAGE CABLE
ANODE LEAD
RUBBER BOOT
LEAD HOLDER
Fig. a
Z450 TPA5007
- 8 -
R G B
1. When replacing Anode Lead or Anode Cap with new
one, remove Lead Holder from old lead as shown in
figure below, and put it on new lead. Do not throw away
Lead Holder.
NOTE : THE LEAD HOLDER IS ATTACHED TO
TPA5011AH (Z450), BUT IS NOT ATTACHED
TO ANODE LEAD AND ANODE CAP.
RUBBER BOOT IS ATTACHED TO ANODE
AND LEAD ANODE CAP.
2. Detaching Lead Holder
RUBBER BOOT
LOCK LEAD HOLDER
Fig. b
SCREEN VR's
FOCUS VR's
OLD
ANODE LEAD
or
ANODE CAP
Cut here rubber boot
and lead together to
detach Lead Holder.