[Service Password] - Panasonic PT-DX820 Operating Instructions Manual

[REGISTERED SIGNAL]
[NETWORK/E-MAIL]
[LOGO IMAGE]
5) Press the <ENTER> button.
6) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f Even when [ALL USER DATA] is executed, the [UNIFORMITY] and [STANDBY MODE] settings are not initialized.

[SERVICE PASSWORD]

This function is used by a service person.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in "Deleting the
registered signal" (x page 131).
Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
Deletes the image registered in [USER LOGO].
ENGLISH - 127