Adjusting the Monitor
Tilt the monitor's panel forward or backward to set it to a comfortable eye level.
Figure 2-4
Removing the Monitor Pedestal Base
You can remove the monitor panel from the pedestal base to install the panel on a wall, a swing arm,
or other mounting fixture.
CAUTION:
power and signal cables are both disconnected.
1.
Disconnect and remove the signal and power cables from the monitor.
2.
Lay the monitor face down on a flat surface covered by a clean, dry cloth.
Tilting the Monitor
Before beginning to disassemble the monitor, be sure the monitor is turned off and the
Adjusting the Monitor
5