Ssid; Beacon-Interval - HP procurve 420 Management And Configuration Manual

ssid

This command configures the Service Set IDentifier (SSID).
Syntax
ssid <string>
string - The name of a basic service set supported by the access point.
(Range: 1 - 32 characters)
Default Setting
Enterprise Wireless AP
Command Mode
Interface Configuration (Wireless)
Command Usage
Clients that want to connect to the network via the access point must set
their SSIDs to the same as that of the access point.
Example
HP420(if-wireless g)#ssid RD-AP#3
HP420(if-wireless g)#

beacon-interval

This command configures the rate at which beacon signals are transmitted
from the access point.
Syntax
beacon-interval <interval>
interval - The rate for transmitting beacon signals.
(Range: 20-1000 milliseconds)
Default Setting
100
Command Mode
Interface Configuration (Wireless)
Command Line Reference
Interface Commands
6-63