Take Out What You Need - Cisco Aironet 350 series Quick Start Manual

1

Take out What You Need

Cisco Aironet 350 Series Bridge
Cisco Aironet power injector with universal
power supply, power cord, and Ethernet
cable. (optional, see the "Connect and Power
Up the Bridge" section on page 3)
Cisco Aironet Series Wireless Access Points
and Bridges CD with documentation, online
help files, and utilities
If any items are missing or damaged, contact your Cisco representative or reseller for support.
Additonal Requirements
• An appropriate antenna for your application, a low-loss antenna cable, and a lightning arrestor
(if the antenna will be located outdoors)
• A computer that is connected to the same Ethernet network as the bridge
• A straight-through Category 5 Ethernet cable for connecting the bridge to the network
• The MAC address from the label on the bottom of the bridge (example: 00409625854c)
• The following information from your network system administrator:
If the bridge will not be receiving an IP address from a DHCP server, a unique IP address for
–
the bridge
The case-sensitive service set identifier (SSID) for your radio network (The SSID is a unique
–
identifier that bridges and client devices use to associate to other bridges.)
If your bridge is not on the same subnet as your PC, a default gateway address and subnet
–
mask
• A second bridge unit if you are trying to connect two LAN segments together
2
LE FT
SE RI AL PO
RT RI GH T/P
RI MA RY
ON LIN E
PO WE R
ET HE RN
ET