Advertisement
7>System select (NTSC/PAL/AUTO)
Press SETUP to enter setup menu. Use direction key to select submenu of System setup,
choose TV System item, then press OK to change the NTSC/PAL/AUTO output mode.
Note: If connect player with TV and then display without color, please select output system
mode to be same with TV.
8>Repeat play
During playing DVD disc, press REPEAT continually in order to select:repeat off→repeat
chapter→repeat title→repeat off. Repeat a specific portion from point A to point B of the disc.
Press A-B first time to set point A, press second time to set point B, press the third time to
cancel A-B repeat function and return to normal playback.
Notice: 1. For VCD2.0 or above , the repeat function will not work till the PBC have be set off.
2. After power off or open the disc cover, the repeat function will be turned off.
9>Program play
You must create your program in the Edit Program menu before you can access the Program
Playback. By selecting Program Playback in the Play Mode menu, you are telling the DVD
player to play the disc in the order you created in the Edit Program menu.
Program edit
1) While playing a DVD disc, press PROGRAM to enter the program menu.
2) Use the digital key to enter desired title/chapter,
3) High light PLAY item, press OK or
to program play. High light CLEAR and press OK to
eliminate the program list.
4) To exit PROGRAM playback, press
key two times.
Note: After power off or open disk cover, the program play will be turned off.
- 2 5 -
Advertisement
