Table of Contents
Advertisement
Main Menu
Table of Contents
You can insert or
LOCK (0)
remove the key only in this position.
To switch from ACCESSORY to
LOCK, you must push the key in
slightly as you turn it. The shift lever
must also be in Park. The anti-theft
lock will lock the steering column
when you remove the key.
If the front wheels are turned, the
anti-theft lock may sometimes make
it difficult to turn the key from
LOCK to ACCESSORY. Firmly turn
the steering wheel to the left or to
the right as you turn the key.
In this position,
ACCESSORY (I)
you can operate the audio system
and the accessory power sockets.
This is the normal key
ON (II)
position when driving. All features
and accessories on the car are usable.
Several of the lights on the instru-
ment panel come on as a test when
you turn the ignition switch from
ACCESSORY to ON.
Use this position
START (III)
only to start the engine. The switch
returns to ON (II) when you let go of
the key.
Keys and Locks
The engine will not start if the
Immobilizer System does not
recognize the key's coding (see page
79
).
You will hear a reminder beeper if
you leave the key in the LOCK (0) or
ACCESSORY (I) position and open
the driver's door. Remove the key to
turn off the beeper.
Instruments and Controls
81
Advertisement
Chapters
Table of Contents
