Adding Original Start-Up Images Or Sounds - Canon PowerShot SD880 IS Digital ELPH User Manual

70
I
Using the Software on the Macintosh Platform - Advanced Techniques
Adding Original Start-Up Images or Sounds
You can add original start-up images or sounds created with image editing and other software
to the My Camera Window. Sound files are saved as WAVE-type files.
1
Double-click the [Applications] folder, followed by the [Canon Utilities] folder,
[CameraWindow] folder and the [MyCamera DC] icon.
The My Camera window will display.
2
Select the [Start-up Image] in Type.
For sound files, select either [Start-up Sound], [Operation Sound], [Selftimer Sound] or
[Shutter Sound].
3
Click [Add].
CHIMPAN2 LSIOI
JI'C
ETHOANCE21SIO l.Jpc
~~~Ji~~~~~a-n-d-s-ou-n-d-~~""-j
files for use as settings
files in the list.
4
Select the file you created and click [Open].
This concludes the process for adding new data.
(.,,"~
~
*-::.
~
-,."'"
~~~
: JPEG (Baseline JPEG)
: 4:2:0
or
4:2:2
: 320
x
240
or
512
x
288*
*
Varies with camera model
You can add the settings files you just added to the computer to the camera using the
same procedures as in Adding My Camera Settings to the Camera (p. 68).
Use the following settings to create start-up images or start-up sounds
using image editing software or sound processing software.
• Start-Up Images
Image Type
Data Sampling
Resolution (WxH)
• Start-Up Sounds
Type : WAV (Monaural)
Bit Rate
I
Frequency :
8
bits
(11.025
kHz or
8.000
kHz)
Set the sound file length to values approximating those in the
following chart.
Type
Duration in Seconds
11.025
kHz
8.000
kHz
Start-Up Sound 1.0 sec. or less
1.3 sec. or less
Shutter Sound 0.3 sec. or less 0.4 sec. or less
Operation Sound 0.3 sec. or less 0.4 sec. or less
Self-Timer Sound 2.0 sec. or less 2.0 sec. or less