Quick Start Guide - D-Link DG102S Quick Start Manual

Quick Start Guide

Comwave Home Phone Adapter
Important: This guide describes the supported configuration for Comwave Home Phone Service. When
calling Comwave's Technical Support Team, your network must be configured as described.
1
3
Output:12v
Package Contents
2
4
Home Phone Adapter
Connections
1 2 3
1 Power Adapter
2 Serial Cable
Used only if instructed by
Comwave to assist with
troubleshooting.
3 WAN
Used to connect to your High
Speed Internet modem using
the Ethernet Cable provided in
your package.
4 LAN
Used to connect to your computer using
an Ethernet Cable (if you are not using a
wireless router).
4 5 6
5 Phone 1
Used to connect to your telephone
handset, using your existing telephone
cord.
6 Life Line
NOTE: Dial "#" to activate this port.
Used to:
a) Connect to an existing phone
jack to access the building
intercom functions in apartment
buildings.
b) Connect to a back-up non-VoIP
land line in the event of Internet
loss, if a back-up line is available.
1
1