Step 6.
Disconnect the data cables from the connectors on the motherboard.
Step 7.
Remove the screw that secures the front I/O assembly to the chassis.
Step 8.
Slide the I/O assembly out of the chassis.
Step 9.
To remove the USB bracket, lever up the bracket's four pins with a screwdriver, then pull the front
I/O board out of the bracket.
Step 10. To install the new front I/O board:
a.
Push the new front I/O board into the bracket, then press down the four clips until they lock
into place.
b.
Slide the front I/O assembly in and secure it with the screw.
c.
Connect the data cables to the motherboard.
Step 11. Reattach the front bezel, then reattach the computer cover.
1
1
2
.
Chapter 8
Replacing hardware
41