Quick Reference - Sharp C6400U Service Manual

LC-52/60/70LE640U/C6400U,LC-80LE633U/844U (1st Edition)

QUICK REFERENCE

Attaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
• After attaching the stand to the TV, do not hold the stand when you put up, set up, move or lay down the TV.
Confirm that there are 12 screws (8 long screws
1
and 4 short screws) supplied with the stand unit.
Set the post for the stand unit onto the
2
polystyrene foam.
Attach the base to the post.
Insert and tighten the 8 screws into the 8 holes
on the bottom of the base.
• Hold the stand unit securely with one hand, and then
tighten the screws.
2
1
Insert the stand into the openings on the bottom of the TV.
3
• Make sure that the stand is firmly inserted into the TV.
Improper installation may result in tilting of the TV set.
Soft cushion
4
2
Long
screws
1
1
• To detach the stand, perform the steps in reverse order.
• In the installation procedure, be careful not to catch your
FRONT
2 – 3
Insert and tighten the 4 screws into the 4 holes on
the rear of the TV.
fingers between the TV set and the floor.
Short screws