Cambridge SoundWorks Newton Series S300 MultiPole User Manual page 6

A small, purpose-built shelf can be used instead of
BOTTOM OF SPEAKER
hanging the speakers from a screwhead. In this case,
we recommend you apply the soft, self-adhesive feet
to bottom of the enclosures. The feet protect the finish
of the speakers or the surface and improve stability if
the surface is not perfectly flat. Apply the feet to the
surface of the speaker opposite the MultiPole switch,
in the pattern shown.
Using The Speakers On A Stand
Cambridge SoundWorks has floor-stands available
for the S200 and S300.
APPLY SELF-ADHESIVE FEET TO
BACK OF SPEAKERS.
The speakers mount to the stand with the MultiPole
switch on top. For this reason, the positions of the
ATTACHING SPEAKER TO STAND
speaker should be reversed (the speaker marked left
should be placed on the listener's right side and
vice versa).
Mount the surround speaker to a stand by screwing
the stand's fastener into the surround speaker's
threaded insert.
SWIVEL BRACKET FOR NON-VERTICAL
OR CEILING MOUNTING
NON-VERTICAL/CEILING MOUNTING
RIGHT SPEAKER LEFT SPEAKER
SWITCH SWITCH
Swivel-brackets (available separately) can be used to
attach the surround speakers to a wall that isn't vertical,
or to the ceiling.
6