LG KF700 Service Manual page 114

4.16.2 Checking UMTS PAM Control Block
• PAM control signal
1. PWR_DET : UMTS Tx Power Detected value (Check R116)
2. TX_AGC_ADJ : UMTS RTR6275 Tx Amp Gain Control
3. VREG_TCXO_2.85V : UMTS PAM enable (about 2.85V)
4. +VPWR : UMTS PAM Main Voltage ( 3V < +VPWR < 4.2V)
5. PA_ON : Turns the PA on and off
6. PA_R1 : Control signals that step the active PA mode and bias
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4. TROUBLE SHOOTING
- 115 -
LGE Internal Use Only