Omniscan Sx Software Installation; Figure 3-7 Attaching A Ferrite Clamp Filter To A Cable (Example Shown With The Scanner Interface Cable); Figure 3-8 Omniscan Sx Connection Diagram - Ferrite Clamp Filters - Olympus OmniScan SX User Manual

DMTA-20043-01EN [U8778624], Rev. B, May 2013
Figure 3-7 Attaching a ferrite clamp filter to a cable (example shown with the
scanner interface cable)
UT probe
Scanner interface
connections
PA probe connection
SVGA output
USB
connection
Figure 3-8 OmniScan SX connection diagram — ferrite clamp filters
3.6

OmniScan SX Software Installation

The OmniScan SX software installation is designed to be as trouble-free as possible.
The software is stored on an SDHC card.
Basic Operation 45