Ryobi RWS14004 Original Instructions Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Saw
  5. RWS14004
  6. Original instructions manual

Ryobi RWS14004 Original Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

ORIGINAL INSTRUCTIONS
Circular Saw
RWS14004

Advertisement

Table of Contents
loading

Related Manuals for Ryobi RWS14004

Summary of Contents for Ryobi RWS14004

  • Page 1 ORIGINAL INSTRUCTIONS Circular Saw RWS14004...
  • Page 2 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.

  • Page 3: General Power Tool Safety Warnings

    Safety tool. Do not use a power tool while you are GENERAL POWER TOOL SAFETY WARNINGS tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious WARNING personal injury. Read all safety warnings and all instructions.

  • Page 4: Circular Saw Safety Warnings

    Safety power tool repaired before use. Many accidents body exposure, blade binding, or loss of control. are caused by poorly maintained power tools. ■ Hold the power tool by insulated gripping surfaces f) Keep cutting tools sharp and clean. Properly only, when performing an operation where the maintained cutting tools with sharp cutting edges cutting tool may contact hidden wiring or its own...

  • Page 5: Intended Use

    Never clamp or tie the lower guard into the open position. If saw is ■ When servicing, use only identical Ryobi replacement accidentally dropped, lower guard may be bent. Raise parts. Use of any other parts may create a hazard or the lower guard with the retracting handle and make cause product damage.
  • Page 6 Safety SYMBOLS Safety alert Wood Do not cut metals Wear ear protection Wear eye protection Danger! Sharp blade Do not expose to rain Width of cut Class II, double insulated Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements. Please read the instructions carefully before starting the machine.
  • Page 7 Unpacking...
  • Page 8 Getting started ø 31.5...
  • Page 9 Getting started...
  • Page 10 Overview p.10 p.11 p.13 p.12...
  • Page 11 Operation...
  • Page 12 Operation 0 - 60 0 - 60...
  • Page 13 Operation...
  • Page 14 Operation...

  • Page 15: Maintenance

    Maintenance...

  • Page 16: Product Specifications

    PRODUCT SPECIFICATIONS Voltage 220-240 V 50/60Hz Input 1400W No-load speed 5,000 min Blade diameter 185 mm Blade arbor 15.88mm (5/8”) Blade Thickness (Max) 1.5 mm (2.0 mm) Teeth 18 TCT Width of cut (Min/Max) 2.2 mm (1.4 - 2.2 mm) Cutting capacity at 0º...
  • Page 17 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand 961152061-03...

Table of Contents